How to use Xhorse VVDI Key Tool Plus Pad to program a new key for 2011 Nissan Maxima? Now I will show the operation steps as below.
Prepare an original key & a new key.
Connect Key Tool Plus with OBD, press
Immo programming >> Nissan >> Read BCM code and release ELV (4 digits access code) >> Start programming >> Read BCM code
Switch ignition on! Press “OK”.
Note: if all keys are lost, please turn on double flash lamps first.
BCM(body computer) number was read out.
Press “OK”.
Weather to calculate the password directly? Yes
Record BCM code and password: 0888, press “OK”.
Press “Unlock steering”.
Switch ignition off first, then release the direction lock, press “OK”.
Input password 0888, press “OK”.
Unlocking steering lock succeeded! Press “OK”.
Go back to
Select from system >> Smart >> 4 digits PIN >> Type 4 (with slot-button type) >> Start programming >> Program smart key
The releasing the direction lock function must be performed before matching the smart keys, whether the direction lock is released?
Press “Yes”.
Please inset the original key and switch ignition on! Press “OK”.
Input password again, press “OK”.
Please follow the steps below to complete the match:
- Turn off the ignition switch and remove the original smart key.
- Insert a new key and turn on ignition switch, the IMMO light flashes 5 times then goes out, the key learned successfully.
- If want to add more keys please repeat step2.
Press “OK”.
Completed.
Let’s test the key now, it works fine.
Key programming has done!
This is using VVDI Key Tool Plus Key Programmer to add a key for 2011 Nissan Maxima step by step.