Program BMW 2013 F30 FEM All Keys Lost with VVDI Prog and VVDI2
FEM-BDC BMW 2013 F30 All keys lost . Done Read data and ISN code with vvdi prog programmer and Bosch ecu adapter. Program key by […]
VVDI2 BMW
BMW 4 Series 2015 FEM Module All Key Lost done by VVDI2 and VVDI Prog
BMW 4 series 2015 FEM module All Key Lost Read ISN Key programming Done by VVDI2 and VVDI Prog on bench Need a FEM/BDC test […]
VVDI2 BMW Current FEM/BDC Version is Not Support?
Problem: A 2012 F30 BMW 335i. FEM is out and on bench. Have isn from DME. Xhorse VVDI2 reports this message” Current version is not support, […]
Possible to Change used BMW FEM with Xhorse VVDI2?
Question: I have BMW FEM with water ingress. Old Fem is damaged How can I replace with used one? Possible to replace it using vvdi2? […]
How to Solve BMW F30 FEM EEPROM Data Lost?
Question: BMW f30 after desoldering 95128 eeprom all data lost {maybe overheated } in new eprom I wrote data from another FEM but car now […]
BMW CAS4 CAS4+ KM Reset using VVDI2 V6.6.8 via OBD
Firstly unlock BMW CAS4 / CAS4+ in 10 minutes, then reset KM via OBDII. Tool Used: Xhorse VVDI2 BMW V6.6.8 BMW CAS4 & CAS4+ […]
How to use VVDI2 to solve problems with E90 CAS3 (Bricked)?
I dumped and modified the OL15Y chip in my CAS3 which seemed to go well, until I tried to start the car. The mileage was […]
How to Prevent the risk of CAS3++ Istap Failure using VVDI2 via OBD
Question: What is the best way of preventing the risk of CAS3++ Istap failure when programming key via OBD only? Using xhorse vvdi2 only. […]
VVDI2 Feedback on BMW CAS1 CAS2 CAS3 CAS4 OBD
Here’s the new feedback for VVDI2 BMW on the latest firmware (V6.6.5): CAS1-OBD good CAS2-OBD mostly good, had EWS tampering fault code with no-start once.. […]
Can VVDI2 change BMW CAS3 CAS4 mileage via OBD?
Question: Can Xhorse vvdi2 read and write cas3 and 4 obd to change mileage? Answer: part of CAS4 can do cas3 usually use […]
Program BMW CAS4/CAS4+ Key with VVDI2 by OBD Cable
Here’s demo tutorial on reading & programming a new BMW CAS4/CAS4+ key with Xhorse VVDI2 by OBD cable step-by-step. Similar procedure goes to CAS4/CAS4+ all […]
VVDI2 BMW CAS3+ Encrypted key error “on the CID and a A0AA CAS” Solution
When using Xhorse VVDI2 to program a key for a CAS3++ (CAS3+ encrypted version) I get a fault in the CAS module every time. Other […]
Is it Safe to use VVDI2 to Make CAS4/CAS4+ Key by OBD?
Confirmed: Xhorse VVDI2 Done CAS4/CAS4+ key programming by OBD. The question is how safe is this solution and the answer is to use Esys to […]
Xhorse VVDI2 V6.6.1 Update CAS4/CAS4+ OBD Programming
Xhorse VVDI2 new software v6.6.1 version release CAS4/CAS4+ OBD programming function. Support all CAS4 with CPU XEP100(5M48H, 1N35H). No need online, no need soldering. *** […]
VVDI2 BMW Coding1: Unknown version Error Solution
Problem: Trying to read backup coding for 2017 bmw X1 with Xhorse vvdi2 and this appears Any suggestions Error: “Please use “BMW E-sys software” to […]