Xhorse Condor XC-002 Pro, What’s New Feature?
Today we’re taking about 6 new features of Xhorse Condor XC-002 Pro manual key cutting machine. LED Light & Speed Display Power up the […]
Today we’re taking about 6 new features of Xhorse Condor XC-002 Pro manual key cutting machine. LED Light & Speed Display Power up the […]
Problem: I want to upgrade xhorse vvdi mini obd tool to v1.5.0 but keep failing. Cannot sync the device either. Is there any solution for […]
Problem: Opel Corsa D all keys have lost. Try to add key with autel failed. Delete dtc with autel. Try to add key with xhorse vvdi key […]
Will Xhorse vvdi key tool plus read BMW CAS4+ (engine N63) ISN code? via OBD or Bench? Yes, it will read N63 ISN on […]
Xhorse Multi-Prog programmer new feedback from vvdishop.com’s customer: GMC Yukon GM Delco E92 ECM Bench read ok Bench write ok. DTC off Multi prog will […]
Xhorse Multi-Prog Programmer is able to write Mahindra Bosch EDC17C55 pickup IMMO Off successfully. Following I’m gonna show how to do it. Open Multi […]
Problem: We have problems with Xhorse Condor XC-009 manual key cutting machine! The battery seem to discharge within a few days. The batteryalso discharge when we don’t […]
Problem: After reading MQB NEC35XX data with Xhorse multi prog and try to program key with vvdi2, but failed, error code 5000, bind the multi […]
How-to: read and write BMW X3 MSV90 DME using Xhorse Multi Prog programmer on bench. Read ok, write OK, checksum by multi-prog. Steps: Reading […]
Problem: I got error code 42 when decoding HU83 key blank with xhorse condor ii key cutting machine. I have cleaned several times Also made calibration again Still same. Any advise? Solution: As the condor ii […]
Here comes the Xhorse Dolphin XP005 (Generation 1) automotive key cutting machine maintenance manual. This manual applies to models with serial number KM06, KM12 of […]
Xhorse Condor XC-002 Pro is the 2024 latest key cutting machine that I’ve got today. The machine is large and massive but simply excellent. When […]
Problem: My friend has problems with the Xhorse dolphin xp005 key cutting machine. It’s not cutting b119 keys correctly. They look identical but only turn on […]
Problem: Anyone have problems with your machine decoding B106 key blank or any gm keys including old gm single side cut.? I can’t get my […]
Problem: I have vvdi mini Key tool and I use vvdi super chip XT27A with ID49 selected from ID49 Ford USA (They was malesia as […]
Copyright © 2024 | WordPress Theme by MH Themes