Xhorse Dolphin XP005L vs. XP-007 vs. XC-009, Which to Buy?
Whether you’re running a 24/7 emergency mobile service or a high-end security shop, your gear defines your reputation. The Dolphin XP-005L, XP-007 and Condor XC-009aren’t […]
dolphin xp007
Xhorse Dolphin XP007 Cannot Adjust Clamp Solution
Problem: The clamp that comes standard on the Xhorse Dolphin XP007 doesn’t work when you try to make micro-adjustments to the screws above the laterality […]
Xhorse Dolphin XP007 Failed to Charge Battery Solution
Problem: I charged the xhorse dolphin xp007 machine for a while night but it still shows level 1. Then shut down when power was cut […]
Tips to Replace Xhorse Dolphin XP007 Main Board
How to replace Xhorse Dolphin XP007 manual key cutting machine main board if it is broken? Here is the clue: 1.Remove Cover like this […]
How to Cut Honda Civic High Security Keys with Xhorse Dolphin or Condor?
Some people reported that they can read Honda Civic Honda high security key but could not cut the key correctly with Xhorse Dolphin or Condor […]
Xhorse Dolphin XP007 Workbench Shakes Solution
Problem: My xhorse dolphin xp007 manual key cutting machine workbench shakes and two handles loosen. It will not cut key properly. How to fix it? […]
Does Xhorse Dolphin XP005/XP005L Cut Dimple Keys?
Question: Has anyone ever cut dimple keys on an Xhorse Dolphin XP005 or dolphin XP-005L. No, Dolphin xp005 and xp005l will not cut dimple keys. […]
How to Check and Replace Xhorse Dolphin XP007 Belt if it is Broken?
If you can hear the sound of the motor but Xhorse dolphin xp007 key cutting machine not working properly after turning on the power, you […]
Xhorse Dolphin XP007 Remove Broken Tracing Probe that Stays Stuck
Anyone have any idea how to remove the xhorse dolphin xp007 broken tracing probe that stays stuck in its place? Solution: These are all possible […]
Can I Cut Ford Tibbe Keys with Xhorse Dolphin XP-007?
I have just purchased the xhorse Dolphin xp-007 manual cutting machine. Does the dolphin xp007 do tibbe keys if so does it come with clamp? […]
How to Disassemble Xhorse Dolphin XP007 Cover to Check Battery?
To troubleshoot the accidental Xhorse Dolphin XP007 key cutting machine battery problem, sometimes you may have to disassemble the machine cover to check the battery. […]
Xhorse Dolphin XP007 vs. Condor XC-002, How to Choose?
Lots of customers want to know what are the differences between Xhorse manual Key Cutting Machines: Dolphin XP007 & Condor XC-002. Many of them do […]
How to Setup & Calibrate Xhorse Dolphin XP007 Key Cutting Machine?
This is a quick installation & calibration for Xhorse Dolphin XP007 key cutting machine. How to setup Dolphin XP007 machine? Remove the protective bolt […]