Xhorse VVDI Key Tool Plus Pad is able to program 2021 Ford Bronco Sport all keys lost via OBD successfully. Following I’m gonna try to add these 2 keys for this vehicle.
Backup P-Flash & D-Flash
Connect VVDI Key Tool Plus with OBD, press
Immo programming >> North America >> Ford >> China market >> Select by model >> Escape >> Smart key system >> 2020- >> Start programming
Follow the instructions:
Open and close driver door once and turn off ignition switch.
OK >> Backup P-Flash
VVDI Key Tool Plus displays a Warning:
Black screen may appear during the execution of this function, which is normal.
Press “Yes” to continue.
It may take about 20 minutes to save P-Flash.
As I have already did, so I just show you the steps and go back.
Press “Backup D-Flash” to save the file as before.
This is just in case everything gets messed up in the system, then you can have your backup.
Program New Keys
Press “Lost all key” after completing all backups.
Yes >> Select P-Flash >> Open
All keys will be cleared, Press “Yes” to continue.
Note: at least 2 keys are needed to complete the key programming!
Key clearing succeeded!
Current number of keys: 0
For smart key: place the new key to be programmed into car emergency sensing area and continue.
For flip key: insert the key to be programmed and turn on ignition switch.
Press “OK”.
You’ll hear the locks coming on and off.
Current number of key: 1
Program successfully! Press “Yes” to program next key.
Just repeat same operations as first key.
Current number of keys: 2
Program successfully. Press “No” to complete.
Finally, let’s have a test.
Both keys are workable, done!
Using VVDI Key Tool Plus to program 2021 Ford Bronco Sport when all keys lost successfully.