Today I’m gonna use Xhorse VVDI Key Tool Max and the Renew Adapters Set just purchased to unlock an OEM Dodge Fobik key. Once it is unlocked, it’ll be able to learn to another car.
The Renew Adapters Full Set has 12 adapters, with this particular set you can do all kinds of vehicles. Instead of having to solder wires to the board, these adapters actually just line up the board where it needs to be and allows the Fobik to be unlocked.
How to unlock Dodge Fobik key?
Here is the OEM Dodge Fobik key.
The Key Tool Max and Renew Adapter No.10 are connected.
As you can see, the Fobik key is “Already locked”.
Open its outer shell, to put the circuit board properly in Renew Adapter.
Press on Xhorse Key Tool Max,
Special function >> Remote renew >> Chrysler & Jeep & Dodge >> Select correct FCC ID: IYZ-C01C M3N5W783X >> Unlock
Renew in process, wait until 100%…
Renew success.
Let’s get the key out to check info again.
As you can see, it is “Unlocked” now, and still outputting a signal.
All right, it’s all good done!
Renew Dodge Fobik key successfully via Xhorse Renew Adapter & VVDI Key Tool Max.