How to: clone chip and generate remote on a Mitsubishi Space Wagon (Mitsubishi Chariot) year 2010.
Vehicle information:
Mitsubishi SpaceWagon 2010
Chip 46 remote frequency 313.8MHz
Device used:
VVDI key tool remote generator
Xhorse universal remote comes with keytool package
Short cable Pin1 to ground
Main steps:
Step 1: Generate Remote
Step 2: Clone chip
Step 3: Program remote
Procedure:
Step 1: Generate Remote
Select Remote/Smart Program->Remote Key->Asia->Mitsubishi->Spacewagon->1338 MR587970 Thailand 313.8 2BTN
Select Remote/Smart Program->Remote Key->Asia->Mitsubishi->Spacewagon->1338 MR587970 Thailand 313.8 2BTN
Connect cable to VVDI remote and press Generate button
Burn success
Fill battery and install into remote shell
Step 2: Clone chip
Clone 46 chip with Xhorse 46 chip
Select Transponder Clone->Automatic Detection
Put transponder in coil
1.Put the head antenna near the ignition coil and press Sniff
2.Turn on ACC switch once with programmed key
3.Insert programmed key into coil and press Caculate
Don’t remove the key until calculate success
Calculate success
4.Take the key out and insert chop XHorse 46 and press Write to clone
Clone success
Test start engine
Works!
Step 3: Program remote manually
1. Insert key
2.User cable short Pin1 to ground within 5s
3.Press hazard button 5-6 times until door cycle 1 time
4.Press unlock 1 time then press again 2 times (door cycle to accepted) all remotes
Test remote
Done.