How to use VVDI Key Tool XN002 Wireless Remote to Clone ID46

Here’s the little guide on how to snoop ignition data with the Xhorse XN002 wireless remote and clone an ID46 transponder chip using VVDI Key Tool remote generator.

 

Turn on your Xhorse VVDI Key Tool

vvdi-key-tool-xn002-clone-id46-1

Select Transponder Clone from main menu

vvdi-key-tool-xn002-clone-id46-2

vvdi-key-tool-xn002-clone-id46-3

Insert the original key into the left coil and press OK to read data

vvdi-key-tool-xn002-clone-id46-4
Press down arrow to start cloning the transponder

vvdi-key-tool-xn002-clone-id46-5

vvdi-key-tool-xn002-clone-id46-6

Select wireless Mode and insert the XN002 wireless remote into the left coil

vvdi-key-tool-xn002-clone-id46-7
Insert battery and put acquisition remote near vehicle ignition coil, switch on igntion 1 time, then put remote back to the Keytool induction coil, press OK to read data

vvdi-key-tool-xn002-clone-id46-8

Go to the car and place the XN002 xhorse wireless remote next to the ignition

vvdi-key-tool-xn002-clone-id46-9

Turn the ignition on to sniff the data

vvdi-key-tool-xn002-clone-id46-10

Insert the XN002 remote back into the left coil to get data

vvdi-key-tool-xn002-clone-id46-11

Insert the original key into the left coil for calculation

vvdi-key-tool-xn002-clone-id46-12

Insert the XN002 remote or an Xhorse ID46 chip into the left coil to finish the cloning process

vvdi-key-tool-xn002-clone-id46-13

VVDI key tool cloning ID46 remote success.

www.vvdishop.com