This is an Xhorse Dolphin XP005L Review for the first time to cut a VW HU66 key. I have an original working key, so will test its decode function as well.
Power on Dolphin XP005L machine, there’s a line of light is awaken. Go to
Vehicle database >> Volkswagen >> All key blank >> HU66
Align M5 clamp side B as prompted.
Fix the VW working key on.
OK >> Learn key
Dolphin II machine starts decoding…
The blue light is normally on that means it’s working.
Wait decoding key complete.
Remove the key, and fix a blank key on.
Cut key >> Cut
Dolphin II machine starts cutting.
Just wait…
Cutting key completed.
Clear the debris and turn over the key to cut other side.
Once again as previous.
Once cutting was done, take out the key to compare.
It’s same as the original one.
Dolphin II XP005L is quite a smart and easy Xhorse Key Cutting Machine. The HU66 key cutting turns out to be accurate and workable.