It’s ok to cut VW Beetle key using Xhorse Dolphin XP005 and VVDI Key Tool Max
This is a Volkswagen lock, before that, I should get its key lock code:
This is the key to be cut, I will cut half of the key just for speed sake to test:
Please make sure to have internet connection for this work (you can connect hotspot when you are outside and I am at home right now so I’m on the Wi-fi) .Also turn on the Bluetooth of key tool max, because key tool maxt comes with the database of Dolphin XP005.
Now let’s start: Press All Key Lost >> Volkswagen >> Input key code to search >> HU66
It tells about to use M2-C Clamp, read the prompts and press “OK”
Double check if the CORRECT clamp was installed, go ahead to lock it up.
Going back to key tool max to press Cutting Key >> Secondary Cutting >> Continue
I always hit the secondary cutting function, it runs one more time to get clear cuts.
Xhorse Dolphin XP005 key cut machine start to go through cutting processing…
The screen of Key Tool Max will also tell the progress at until 55%…
Now it is finished up, brush all the brass off, and test the key to make sure that it works or not.
Alright, it works perfect!
This is using VVDI key tool max all keys lost function with the code to cut a key, it is fast and simple, easy to use. So far I’ve had Xhorse Dolphin key machine for 4 mounths, I am very happy with it. More function tests to be updated…