How to Cut by Bitting Key HU64 using Xhorse Dolphin XP005

Q: Hello, Shop. Need some help cutting HU64 with Xhorse Dolphin XP005, How to align the tip of the key?


The new MB keys are divided into three types(Cut by Bitting → HU64),there is different key data on the different type which is shown on the picture below:


Analysis: Please observe the red box in the picture, where the values are 580(HU64), 450(HU64-2),380(HU64-3).The three values represent the distance between the 10th Bitting and the key tips.You can choose the appropriate cutting option according to the original key. (the larger the value, the smaller the slope)
HU64 2
The more details you can check the video:
How to cut make the right HU64 key with Xhorse Dolphin XP005 step by step

Hope it helps, best regard from VVDISHOP