Using Xhorse Condor XC-Mini Plus to cut a key for Citroen C1 Bj. 2008 is very easy and useful. I do not have to enter any names or codes of the key blank, only select the key type as long as having a working key.
Install the original working key on M2 clamp, press on tablet screen,
Key duplication >> Universal type >> 4 track internal >> Confirm >> Key decode
Note:
- Clean the key/probe/fixture and electrical conductivity OK.
- Recommended to use M2-B, M2-C fixture and 2.0mm drill.
Condor XC-Mini machine starts decoding…
Take out the key when decoding complete, the screen will show “Learn OK”.
Replace to key blank on M2 clamp, and fix it flat on.
Press “Cut”.
Condor Mini Plus machine starts cutting the key…
Clean the key and turn it over when one side cutting finished.
Repeat same operation, wait till cutting completed.
Take out the key to have a test, it can switch the ignition.
Done!
Xhorse Condor XC-Mini Plus is a smart key cutting machine, which does not requires you to do much, it will finish key decoding & cutting automatically. Actually a helpful machine for each locksmith.