Today I’ll show the procedure of how to use Xhorse Condor XC-Mini Plus + VVDI Key Tool Max to cut & program a key for Toyota Camry 2007.
Condor XC-Mini Plus Cut Key
Fix the key blank to be cut on clamp beforehand.
Press on Condor XC-Mini tablet screen,
Key database >> Toyota >> Input key code: 55510, confirm >> Confirm >> Cut
XC-Mini Plus starts cutting key…
Wait until cutting completed.
Clear the iron scraps and take out for a test.
It can open the Camry door lock & ignition switch.
Key cutting has done!
Key Tool Max Clone Transponder
Here we go to next step.
Using VVDI Key Tool Max to program the new key.
Put the original key into Key Tool Max slot, press
Transponder recognize & clone >> Read transponder >> Clone >> Start clone
Data upload successful.
Put a VVDI Super Chip into Key Tool Max slot & remove the original key.
Wait for the data to be written…
Clone success.
Press “Complete” to finish.
Now let me try the new key with super chip on it, it can start the engine.
Key programming has done!
This is using Xhorse device: Condor XC-Mini Key Cutting Machine & Key Tool Max Programmer to create a key for Toyota Camry 2007 successfully.