First attempt:
Reading Toyota Aygo 2008 24c04 eeprom with xhorse vvdi prog. Numbers on box 89780-OHO11. Trying to make chip with vvdi2 but saying ‘This file is not supported by current model’.
Tried with Zed full use file from vvdiprog bust says file to big.
Im508 read chip but can’t find agyo on chip write via dump.
Abrites no joy.
Tmpro no joy.
Im508, Xtoolpad 2, Vvdi prog All read file the same.
Second attempt: Success!!
It was caused by bad reading. Took off board and got a better read.
vvdi-prog works fine
Vvdi 2 and xhorse super chip
No need to write back if you generate a used slot.
Chip will start vehicle.