There are two solder free adapters for land rover kvm modules. Is there a difference? Or is one better?
Applied to programming the KVM Module for Land Rover and Jaguar with SPC56 MCU
Connect to programmer such as VVDI PROG Directly no need soldering wire, very convenient.
It is suggested to use VVDI Prog KVM full erase read & write when reading & writing, If you choose to decrypt/read/write, you need to do a lot of wiring and disassembly of the Jaguar KVM hardware and it may cause KVM module damage.
It supports Land Rover after 2018 year.
Choose the type MCU SPC56xxxxxx from VVDI Prog software
Xhorse Land Rover KVM Adapter for VVDI Prog supported KVM Processors:
- Land Rover KVM Module with SPC56xxxxxx processor
- Range Rover KVM Module with SPC56xxxxxx processor
- Jaguar KVM Module with SPC56xxxxxx processor
Supported Models:
| JAGUAR | ALL MODELS | 2010 | 2019 |
| LAND ROVER | ALL MODELS | 2010 | 2019 |
| RANGE ROVER | ALL MODELS | 2010 | 2019 |
| RANGE ROVER | EVOQUE | 2012 | 2019 |
| RANGE ROVER | SPORT | 2010 | 2019 |
| RANGE ROVER | VELAR | 2017 | 2019 |
| RANGE ROVER | VOGUE | 2012 | 2019 |
It is compatible with both VVDI Key Tool plus, mini prog and vvdi prog (vvdi prog you will need DB25 to DB15 converter as well)
This XNDP16 adapter is for Land rover KVM 2015-2018.
