How to Cut Key HU64 using Condor XC-Mini


Need some help cutting HU64.
Today I’ve got my Mini Condor key cutting machine.
How to align the tip of the key?



Put on a glove if you can’t tighten it with bare hand.

Problem solved. The Jaw was not assembled wrong from factory. I open it and put it as it should be.


Q: What is the difference between HU64, 64-2, 64-3 and 64T?

A: M2 tighten HU64 key blank no problem. HU64, HU64-2, HU64-3 the distance from key tip to first bitting is different(580,450,380)1mm=100.
such as Mercedes HU64 because different country with different HU64 types, so Xhorse added 3 types from all customers.
so for add spare key, when decode key customer can check the probe detection points whether at proper position.
one more thing, we usually try HU64-3 first, in China mostly select HU64-2 for Mercedes.


The distance from the tip of the key, to the last cut.
If you are not sure which one to choose, just go for the Hu64-3.