Key:
The key blank or remote key you are cloning to
The original key to clone from
Car: 2014 Vauxhall Combo van (the key will need to work on)
Once you have the necessary items we can begin the process of cutting and cloning a spare STD non remote ID46 car key, in this case a 2014 Vauxhall combo van.
Xhorse Condor XC-Mini cut a spare key
First, switch on the Condor Mini cut to code machine.
Select either ‘Key Database’ or ‘Cut by Bitting’
Type in the key blank using the keypad on screen. In this case SIP22.
The information screen appears. This shows you the correct jaw to use and the correct stop position to set your key to.
As we are decoding and then cutting, put the original key into the correct jaw and position as instructed by the screen diagram.
Then select the ‘Key Decode’ option on screen
On the next screen select ‘Confirm’.
The machine will then begin its work.
Once the key has been decoded the decode will be displayed on the screen.
Now remove the original key and insert the key blank you are cutting to correctly in the jaw as instructed by the on screen diagram.
Then select ‘Confirm’ to cut the key.
Side 1 is cut.
Turn the key blank over and set it correctly in jaw to cut side 2.
Click ‘Confirm’ and cut side 2
Side 2 is cut to code and your spare key is now cut.
It is good practice to use a wire brush or nylon brush wheel to clean the newly
cut key to ensure that there are no sharp edges.
Now we have cut the spare key, and are ready to clone the key using key cloner JMD handy baby so it starts the vehicle engine.