Problem:
Tried to generate 2011 Toyota RAV4 AKL proximity with Xhorse key tool max pro using XM38 Toyota smart key. Tried every option available for the 11 model and with some option I get no beeps and with some I get a single beep when adding new proximity after smartbox reset. Any solution?
If you have one beep it means that the transponder sets correctly but the proximity part of the key isn’t, you need your change frequencies in order to find the working one.
Possible solutions:
Solution 1:
RAV4 & Highlander generally share the same keys around that era.
In special functions/vvdi remote settings/toyota scan your XM38 & check the signal strength (0 is the strongest – 7 is weakest)
We’ve had cars with the right profile not detect because the signal strength was a 4, changed to 1 and went straight in with 2 beeps.
Solution 2:
Take out battery of xm38 after correct remote generation.
For some weird reason the double beeps on successful add, only happen with no battery in remote.
It’s counter intuitive as you usually just leave battery in to generate. Try it next time, it’ll work perfect. Have to do this on prox Toyotas only.