Xhorse VVDI Key Tool Plus is able to repair VW Vento/ Polo NEC24C32 mileage by KM recalibration function without connecting to ECU. Following I’m gonna show how to do. The original mileage is 6532km on dashboard.
Connect Key Tool Plus, instrument panel & smart CAN solution tool all together.
- Back Up EEPROM
IMMO programming >> European >> VW >> 4th immo system – Volkswagen/ Skoda/ Seat >> Instrument with NEC+24C32 >> Start programming >> Read instrument information
Here to check VAG number, HW/SW version and VIN on Key Tool Plus.
It’s better to backup immo data firstly before doing mileage correct.
Read immo data >> Login Method 2
*If the ignition key is inserted or when use the all-key-lost mode, there is the prompt to insert the ignition key, then you can select “Login Method 2” to try.
Here to check all immobilizer information, including 3 keys.
Press OK.
Whether to save the data? OK
- Repair Kilometer
KM Repair >> Yes >> Yes
Warning: KM recalibration only use for repair car KM after exchange new dashboard!
You can not use the function for other purpose, the user should take all risk if use in illeagal purpose.
Input new KM: 65330
Press OK to confirm.
As we can see, the mileage on dashboard has been changed to 6533km.
Reset success.
