This is a quick guide on using Xhorse VVDI Key Tool Plus Pad to add smart remotes for 2010 Ssangyong REXTON RX270. Because customer only have a chip key, not remote PCB. The procedure is included clone chip, generate & program remote.
Original working key
Insert working key into VVDI Key Tool Plus coil.
Transponder clone >> Read transponder
It’s 4D, DST40, and cloneable.
Transponder clone >> Start to clone
Note: DO NOT remove the key during identification.
Chip recognizes success…
Take out the original key and put in Super Chip XT27.
Detected Xhorse Super Chip.
Test the new key, it can start the car.
Remote program >> Ssang Yong >> REXTON >> REXTON FSK 315.000
Connect Remote XK, press “Generate”.
Put battery and install XK PCB into remote shell.
Turn ignition on.
Immo programming >> Ssang Yong >> Select by system >> Remote key adaptation >> Type 1 >> Start programming >> Remote key adaptation
Switch ignition off and pull out the key.
Press “Emergency” button of remote for more than 2s…
You can hear the sound, and Hazard light blinks.
Whether to program next one? No
Test the remote, it does work.