How to use Xhorse VVDI Key Tool Max to clone a spare key for 2014 Fiat Doblo? It’s very fast and easy, following I’ll show the procedure.
An original working key, a blank new key and a VVDI Super Chip are required.
Put the original key into Key Tool Max coil, press
Transponder clone >> Read transponder
Information has read out, it’s cloneable.
Just follow the instructions to clone, continue to press
Clone >> Start clone >> 46 transponder clone >> Original key clone(recommended)
Note: don’t remove the original key
It’s asking to sniff at the data, so what I have to do is to put the antenna near the ignition and turn it on.
Put the original key into Key Tool Max coil again as required.
Wait collecting data…
Take out the original key, then put a Super Chip into coil.
Write data success.
Let’s put the Super Chip inside a new key shell to have a test.
As you can see, it starts the vehicle.
Let me try the original one, both can start the car.
It is a very simple process with VVDI Key Tool Max to clone a key for 2014 Fiat Doblo. It only takes me 4 minutes to finish.