If the Xhorse Dolphin XP005 Key Cutting Machine does not do electrical conductivity measurement, you may meet problems like the cutter was broken when cutting keys every time.
How to do electrical conductivity measurement for Dolphin XP-005?
Go to Xhorse app,
Device information >> Electrical conductivity measurement
- Probe and clamp
- Cutter and clamp
Please use blank key or any other conductor to connect the probe and the clamp/ the cutter and the clamp in successive order, to measure their electrical conductivity(as shown in figure). If the electricity conducts through the conductor, the green light turns on.
Just follow the tips to operate, press “Start” to perform actions in order.