How to use Xhorse VVDI Mini Key Tool to modify smart key button data? Locksmiths may need the tip when making a smart key. Here is the procedure with VVDI Mini Key Tool, it is suitable for VVDI Key Tool Max as well.
Procedure
- Go to main menu after connecting with VVDI Mini Key Tool.
Vehicle remote >> Chrysler >> All remotes >> Chrysler KeylessGo ID46 433M
- Modify button-distance >> Read
Smart key data will come out after press “Read”. If we found the “Lock” button is contrary to “Trunk” button, press them to correct the data.
Modify “Lock” button from 2 to 4, press “OK”.
Modify “Trunk” button from 4 to 2, press “OK”.
We can also modify the “Frequency” and “Baud1”.
It is benefit for the situation when the remote distance is too short to work well, it would be work. For example, the frequency is 433.899, we edit it from 433.899 to 433.919, and we edit baudi1 from 7800 to 7600. When the keyless go function does not work well, try to adjust baud2 from 7800 to 7700 either.
- Write data to smart key
Press “Write” button to save the new remote control distance and sensing sensitivity data to smart key.
Write OK. It is done, no need to match the vehicle again.
This is a tech tip of fine tuning smart key remote control distance and sensing sensitivity data with VVDI Mini KeyTool.
Good luck!