VVDI Key Tool Clone Audi A1 2018 ID48 Remote Key

New test report:  Audi A1 year 2018 ID48 key cloning done by Xhorse VVDI KEY TOOL remote maker.

vvdi-key-tool-audi-a1-id48-1

*You should have Keytool ID48 96bit function activated and download Bluetooth app before operation.

 

Procedure:

Insert original remote into Keytool left coil to read key data

Select Transponder clone->Automatic detection

vvdi-key-tool-audi-a1-id48-2

vvdi-key-tool-audi-a1-id48-3

VVDI Key tool identify remote information: ID48, TP25 Audi

vvdi-key-tool-audi-a1-id48-4

Remove key

Insert ID48 chip and read chip information

vvdi-key-tool-audi-a1-id48-5

Connect VVDI Key Tool with mobile phone via Bluetooth

vvdi-key-tool-audi-a1-id48-6

Select Transponder Clone function->ID48 data acquisition

vvdi-key-tool-audi-a1-id48-7

Put VVDI Key Tool antenna close to ignition switch or coil detention area

vvdi-key-tool-audi-a1-id48-8

vvdi-key-tool-audi-a1-id48-9

Sniff data
If original key is not smart key, insert the original key, turn on ignition switch, then turn off, pull out the original key, repeat above procedure until sniff data completed.

If original key is smart key, take out the batter of original key, then put original key close to coil detection area and light up cluster turn off the ignition switch, move away the original key, repeat above procedure until completed.

vvdi-key-tool-audi-a1-id48-10

Data acquisition success

vvdi-key-tool-audi-a1-id48-11

Put the original key into the VVDI Key Tool left detection coil, to verify the original key

vvdi-key-tool-audi-a1-id48-13

Read ID48 key data success
Then put the new ID48 chip, press Write button to write chip

ID48 chip copy success.

vvdi-key-tool-audi-a1-id48-14

Sync transponder key

New key works great.

http://www.vvdishop.com/