How to use Xhorse Dolphin XP007 to cut flat key, civilian key, single-sided key etc?

Xhorse Dolphin XP007 manual key cutting machine is tested ok to cut Sided, Track, Dimple and Tibbe keys. It is very suitable for outdoor key cutting jobs.


Xhorse Dolphin XP007 has unique clamps.

  1. It can clip both the civilian keys and car keys (i.e Ford, Benz keys)


2.The two sides of clam can be switched, and the other side can clip the cylinder key too.




  1. There are two screws bellow and one screw on the side. If you find the whole clamp has deviation or the key cutting job has deviation, just loose the screws and calibrate.


Xhorse Dolphin XP007 VS Dolphin XP005 VS Condor XC-002

  1. Compared with the Dolphin XP-005 automatically key cutting machine , Dolphin XP007 is manual, therefore, it is cheaper; also It does not depend on the mobile phone, so it is convenient to use anywhere anytime.


  1. Dolphin XP007 can cut as the same key types as Condor XC-002 manual key cutting machine.

XP007 is lighter (about 30.86lb), portable and comes with battery, so it is portable to take out for key cutting job.


Xhorse Dolphin XP007 workable car key type.


Xhorse Condor Dolphin XP007 test reports

  1. How does Xhorse Dolphin XP007 cut the flat key?

Clip the original car key on the right fixture, and the key blade on the left fixture.

There are several special clamp head for flat key.

Adjust the height

Start to cut.

Cut complete and insert it into the key lock to see if it can start the car.



Video demo:  

How to cut flat milling key with Condor Dolphin XP007

  1. How does Xhorse Dolphin XP007 cut single-sided outer key?

The original key won’t be clipped tightly on the fixture, please loose the front screw and turn the bottom of the clamp to the top, then clip the key on the fixture, you will find it will be tightly clipped.


Then tightly clip a key blade on the left side of fixture.



Adjust the machine height.



The key is cut flatly.


Video demo:

How to cut single-sided milling key with Xhorse Dolphin XP007

  1. How does Xhorse Dolphin XP007 cut civilian key?

Clip the original civilian key into the first track on the right clamp.

Clip the key blade into the left clamp.

Adjust the machine height, when the height is ok, the upper first two indicators will flash.




Test successfully.


Video demo:

How to cut civilian Baodean key with Condor XP-007


Xhorse Dolphin XP007 manual key cutting machine in stock