(Fixed) VVDI MB V5.0.3 Renew ECU Error “connecting to unit…failed”

November 19, 2019 VVDISHOP Xhorse Key Programmer 0

Used VVDI MB V5.0.3 for renew ECU successfully before, but today get error “connecting to unit…failed”. What’s the matter?

 

Xhorse Engineer solution:

Please take a picture of VVDI MB software error; and a picture of the engine number.

 

Here you can see the error images:

vvdi-mb-v5-0-3-renew-ecu-error-solution-01 vvdi-mb-v5-0-3-renew-ecu-error-solution-02

 

After seeing the above images, engineer share the correct wiring diagram to follow:

vvdi-mb-v5-0-3-renew-ecu-error-solution-03

 

Let us look forward to the good news of this user.

 

Good luck to him.

 

www.vvdishop.com

Related posts:

  1. VVDI MB BGA TOOL V2.1.7 Unlock NEC issue and finally solved
  2. VVDI MB adapts W204 ESL in 2 minutes: no need to renew EIS
  3. (Fixed) W204 data acquisition not possible with VVDI MB 5.0.2
  4. (Fixed) VVDI MB – No USB Connection – Device Not Found