We have a customer who successfully decoded and cut 2022 Ford Maverick HU198T key blank with Xhorse condor ii under Escape HU198T.
Xhorse Condor XC-Mini Plus II Cut 2022 Ford Maverick HU198T Key
Here is another way to decode and cut new HU198T key blank if you don’t know decode under Escape HU198T.
It is a 2024 Ford Mavericks. It has new HU198T key blank.
Let’s control the Xhorse Dolphin XP005 key cutting machine by the VVDI Key Tool Plus.
Go to Cut key-> Vehicle database
If selected by model Ford->Maverick, no 2024 HU198T is available. So we cannot go by car.
We scroll down All key blank. There are 4 HU198Ts. The difference is the depth.
All 4 of them say 10bits, this one if we go into it we can see down here it has five depths.
Another one has four depths.
We are not sure about which to choose. What happens if you decode it with the wrong key blank.
For example, let’s decode under 4 depths.
What it decodes is wrong.
If we go find bitting, it is not going to come up with anything.
Then we go to the 5 depths, the bitting the same.
But try find bitting, still no data.
Let’s select 1st one that also 5 depths.
Still got the same bitting.
If we go to find bitting, we got the key code this time.
That’s correct.
We can cut key by Dolphin XP005 with the key code.
What is the difference between the 2 five depths?
Looking at those little numbers down next to 12345.
One has little number and one does not. That’s the difference.
If you want to be safe, find one you know if you are decoding an existing key and you don’t have the vantage of having a code.
Do a little trial and error and if you find one that spits out a code when you hit the find bitting button, it is pretty safe to say that you got the right one.