BMW E87 CAS2 All Keys Lost with Xhorse VVDI2 and CAS Plug

This is a BMW Series 1 E87 year 2005 CAS2 immo system. All keys have los. key programming is successfully done by xhorse vvdi2 and CAS plug on bench ( also possible by OBD ). Key cutting with xhorse condor xc-mini plus by mechanical key code.

 

Key info.

ID46 Hitag PCF7953

remote key, frequency 868MHz

Vvdi2 Bmw E87 Cas2 Akl 1

Remove CAS2 module under the instrument on the driver side

Vvdi2 Bmw E87 Cas2 Akl 0

Connect CAS2 module with vvdi2 bmw and xhorse CAS plug

Run VVDI2 software, select BMW function

Vvdi2 Bmw E87 Cas2 Akl 2

Vvdi2 Bmw E87 Cas2 Akl 3

Press Connect and detect CAS info
Get key cutting code

Vvdi2 Bmw E87 Cas2 Akl 4
Press Get key info and select all keys lost
the dealer key should be taken away from ignition switch, if key is keyless, more it out of car
save key info

Vvdi2 Bmw E87 Cas2 Akl 6

Vvdi2 Bmw E87 Cas2 Akl 7
select an unused key position

Vvdi2 Bmw E87 Cas2 Akl 8

Vvdi2 Bmw E87 Cas2 Akl 9
insert key to be programmed into vvdi2 bmw
press Prepare dealer key with programmer
vvdi2 ask if key has keyless, press No

Vvdi2 Bmw E87 Cas2 Akl 10
make key success and locked.
if cannot start engine, use Add key function add the dealer key to CAS system

install CAS2 module back to the vehicle

Then cut key with xhorse condor xc-mini plus key cutting machine
Vvdi2 Bmw E87 Cas2 Akl 11

Vvdi2 Bmw E87 Cas2 Akl 12

Test the key and remote control

Vvdi2 Bmw E87 Cas2 Akl 13

Done.

www.vvdishop.com

Possible to Read BMW CAS3 with VVDI2 on Bench?