Is it possible to read CAS3 in bank with godiag gt100 and xhorse vvdi2? I’m trying and I couldn’t.
Suggestion:
Yes, with xhorse CAS plug.
Using Cas3 adapter or bench vvdi prog soldering easy.
If it’s CAS3+ or CAS3++. You’d better dump eeprom by adapters or soldering.
This is the diagram however it’s better to solder to obtain the EEE and Flash save first and play with the module until your heart is content.
Or Connect with the JBBFE.
You can have xhorse cas plug or make you own cable like this
BMW CAS3 in action with VVDI2 and CAS adapter
1)
The device acts as gateway.
2)
with an actual gateway this time
BMW CAS3 in action with vvdi key tool plus and CAS plug
Your device acts as gateway.
