Xhorse VVDI Super Chip, released in 24/04/2019 with the update of VVDI2 v6.5.0, gets a lot of attention these days, here I’d share:
What does VVDI Super Chip look?
What is VVDI Super Chip for?
How to use VVDI Super Chip?
- What does VVDI Super Chip look?
- What is VVDI Super Chip for?
For the following chips programming:
chip 7935 33 40 41 42 43 44
chip 7930 46
chip 7930 47
chip 7930 4D chip on board
chip 7930 45 chip on board
chip 7937 46 chip on board
chip 7947 47 chip on board
chip 4D 60 63 70 80 83 82G 67
chip 4E 64
chip 4C
chip 8C
chip 8A Toyota H chip/Hyundai
chip 43 VAG/Honda
chip 8E Audi/Honda
chip T3 Buick model
chip T1/T2/T3
- How to use VVDI Super Chip?
Used with VVDI2 v6.5.0 or newer version, VVDI KEY TOOL, VVDI MINI KEY TOOL.
How-to’s of VVDI Super Chip + VVDI2 copy Toyota 8A chip:
Put the original key into the coil of Handy Baby 2, it displays Toyota 8A chip.
Put the original key into the coil of VVDI2;
Put the new remote key (with Xhorse VVDI Super Chip ) into the coil of Handy Baby 2, it displays 8E chip.
Take out the VVDI Super Chip 8E chip.
Connect VVDI2 (with the original key in the coil) to the computer, starts to copy.
VVDI2 identifies the original key info:
Chip type: Tiris DST AES (8A).
Configuration parameter: Toyota H chip (128bit) – Corolla
Click on “Start to copy”.
1). Put the original key into the coil of VVDI2 to read out the key data.
2). Take out the original key from the coil of VVDI2 key programmer.
3) Put the remote key with the VVDI supper chip into the coil of VVDI2.
Writing into the data, it takes about 15 seconds.
4) Online password calculation ( It will deduct 200 bonus points per time for Toyota H chip generation)… Succeed.
5). Writing the data, please wait…
Copy successfully.
Again, put the Xhorse VVDI Super Chip into the Handy Baby 2, it reads out 8A chip.
Copy job is done.
