The XhorseMQB48 Solder-free Adapters make reading complex BGA dashboard simple and low-risk! No longer need to solder, lift pin or cut wire, plug and play. Following we’re gonna show how to read BGA D70F3532 with Xhorse VVDI Key Tool Plus as an example.
Eg. If reading D70F3524, it does require to read & load EEPROM as well. In this case, it does not require.
Step1. Programmer Reads Files
IMMO programming >> VW >> Select by type >> MQB instrument immo system >> Instrument-MQB48(VDO/JCI-NEC35xx lock) >> Start programming >> Read disclaimer, OK
Please ensure network connection is good.
Programmer reads files >> Read NEC35xx chip >> Adapter method >> D70F3532
Follow the diagram to connect XDNP83 adapter & dashboard.
- Locate the positioning points, connect and apply the clips.
*Note: make sure the pins aim right at and keep good contact with the points.
- Connect XDNP83 Adapter & Key Tool Plus via DB15 cable, power it up.
Read >> Continue
Read succeeded.
Save immo data file. This file can be used to generate dealer key or learn key.
Step2. Obtain Immo Data
Obtain immo data >> Load the saved NEC35xx chip file
Press “No” to upload external EEPROM 95320 data to the server.
This gonna takes 5-10 minutes…
Just wait for calculation completed.
Read also