Today I’m gonna show how to use Xhorse VVDI Key Tool Plus to program a new key ID47 for Chevrolet Colorado 2017 by OBD.
This is a flip-key 433Mhz to be programmed.
Prepare an original key and a new blank key.
Plug VVDI Key Tool Plus connector into OBD, press
Immo programming >> Chevrolet >> Colorado >> Flip-keys program >> Start programming >> Key count
Follow the notes to operate:
Switch ignition on.
Confirm current key numbers: 2.
Press “Add a key”.
Close all doors, turn on the ignition switch.
Press “OK” to continue.
Enter 4-digit password, press “OK”.
It will need to wait for about 10 minutes…
Turn off the ignition switch and remove the original key.
Open then close the driver door, make sure all appliances are off.
Insert the new key to be programmed, turn on the ignition switch to ON position.
The current key matching completes!
Press “OK” to add more keys, press “Cancel” to compete.
Turn off the ignition switch and remove the key.
Open then close the driver door, make sure all appliances are off.
Please wait for 44s…
Switch ignition on.
Switch ignition off.
Switch ignition on.
Key matches successfully, please use each key to check engine start!
Test the keys, both can start the engine and remote works fine.
Key programming was done!
Using VVDI Key Tool Plus Key Programmer to add a ID47 key for Chevy Colorado 2017 successfully.