Can Xhorse VVDI BIMTool Pro read ISN from ECU DDE (diesel ECU)?
Yes, the BIMTool pro can directly read the ECU ISN, and support the following types in picture below.
Part I:
EDC17C45
EDC17C56
EDC17C50 (Fxx)
EDC17CP49
MEVD17.2.3 (B38)
MEVD17.2.K (B38)
MEVD17.2.4 (Exx N20)
MEVD17.2.4 (Fxx N20)
MEVD17.2.5
MEVD17.2.6 (N55)
MEVD17.2.8
MEVD17.2.9 (Exx N20)
MEVD17.2.9 (Fxx N20)
MEVD17.2.H
MEVD17.2.P (Fxx N20)
MEVD17.2.G (N55)
MEVD17.2.G (Fxx N55)
Select the correct type, connect as connection diagram, and click “Read ISN” to read it. If you can’t read it, you can click “Upgrade ECU Adapter”. If the adapter can be upgraded means it is normal, check whether the connection and option are correct, and try to read repeatedly.
Check ECU pinouts here
Here is an example
Part II:
Xhorse VVDI BIMTool will read ISN for following DMEs
MSV80
MSV801
MSD80
MSD81
MSD802
MSD812
MSD851
E series ISN-MEV9N46L/MSV70/MSS60/MS450/N62
E-series ISN EDC16xx
E series ISN EDC17XX 16 bytes
MED17xx/MVD17xx/MEVD17xx/MV1722 E series
MED172/MEV17N46/ME17N45 E series
MEVD172Y/MEVD172/MEVD1725/B38/B48/X63TU F series
CAS3+ 0L15Y, 0M23S, CAS3++ ISTAP- E series
CAS3 1L15Y- F series
CAS4+ 5M48H F series
Here is an example:
Xhorse VVDI BIMTool Pro Read BMW MSD80 ISN and Change VIN Success