Xhorse Dolphin XP005 Calibration Error 35 Solution

Problem: The Xhorse Dolphin XP005 Key Cutting Machine can’t work normally, it gave a clamp calibration “Error: 35” message.

 

“Error: The end tip of the probe is beyond the cutter.

1. Please confirm that the clamp is correct;
2. Do again of height level adjustment.”

 

What’s the matter? Please help.

 

Solution

1. Pull the probe down a little bit;
2. Follow the prompt to do again height level adjustment.

 

Thanks to www.vvdishop.com, problem has finally solved!