Hey everyone, today I got a door lock from a 2000 Volvo S40, so I’m gonna use the Xhorse Dolphin XP005 machine to cut a HU56 key for it.
I did decode it to get the bitting codes:21324343, and its lock code is DH0800.
I will use the Xhorse Key Tool Max to control it, you can also use Xhorse app on a smart phone instead.
Connect it with Dolphin XP-005 to start:
All key lost >> Volvo >> Input lock code: DH0800
Install M2-A clamp, and fix HU56 key blank as prompts, press “OK”.
Just to verify the bitting codes are all right, press
Cutting key >> Continue
Xhorse Dolphin will start cutting automatically…
Wait until the machine stopped, take out the key to cut the other side.
Go back to press on Key Tool Max,
Cutting key >> Continue
Dolphin XP005 will go on cutting…
Take out the key when machine was completed, it can open the lock flawless!
Done!
This is using Dolphin XP005 Key Cutting Machine to cut a HU56 door lock key for 2000 Volvo S40 all key lost successfully!