Xhorse VVDI MLB Tool is a newly launched MLB programmer to add spare key to VW, Audi, Porsche, Bentley, Lamborghini etc. The MLB-Tool itself is used to calculate MLB immo data online. You have to use VVDI2 or VVDI Key Tool Plus with the MLB Tool to program keys.
How to use VVDI MLB Tool with VVDI2?
Main steps:
1.Read Key information
2.Calculate immo data
3. Generate dealer key
4. Learn key
1.Read key information
Make sure your vvdi2 has VV-02 VAG IMMO5 and VV-05 MQB licence activated.
Run VVDI2 or Key Tool plus, go to Main menu->Key Programming->MLB key programming
Read vehicle information
Here is the English version of this interface
2.Calculate IMMO Data with VVDI MLB Tool
Step 1: Connect the MLB Tool adapter to the PC via a USB cable (No Need to use OTG adapter).
Place the original key on the sensing area of the MLB device. and run the MLB software.
Put the original key on the sensing area for detection.
Step 2:
Follow the software’s tips to confirm that the key type is supported.
Then remove the shell of the original key, take out the PCB and perform the relevant welding operation following the instructions.
After the welding is completed, plug the welding harness into the VVDI MLB tool adapter, at the same time, place the key in the center of the sensing area.
Step 3:
Select “Collect Key Data” in the software to collect and calculate the data online
If need to use the original key ID, first read the vehicle information to get the ID and then use the Modify Key ID function to change ID.
NOTE 1: If original key ID is FFFFFFF, you can change ID only once.
3.Generate dealer key
Select Generate a dealer key
Load MLB immo data saved to generate dealer key
3.Learn key with VVDI2 or VVDI Key Tool Plus
English instruction will be available soon.