Tips: Never Unlock Audi BCM2 Encrypted when Read and Write
Since Audi BCM2 Solder Free Adapters have been widely used, many users met data loss due to misoperation. It should be noted that never unlock […]
Since Audi BCM2 Solder Free Adapters have been widely used, many users met data loss due to misoperation. It should be noted that never unlock […]
Xhorse VVDI Prog ecu programmer software was released to V5.1.1 on Jan. 24th, 2022. V5.1.1 vvdiprog (2022-01-24) This version DON’t need update firmware * […]
How-to: clone Smart 450 SAM module Motorola 9s12dg256 Mask 2k79X by xhorse vvdi prog programmer. Donor SAM New SAM using 2K79X wiring diagram from xprog […]
2017 BMW 330i B46 (MG1CS003) ISN failed to read with Yanhua ACDP, It is not G series, im508 reads it FEM system. Possible to read […]
Xhorse VVDI Prog programmer software update to v5.1.0 (2021-12-31) * This version DON’t need update firmware * Fix M95010, M95020, M95040,options in <1-EEPROM&FLASH>-><ST> * […]
Is there any board which works for solderless CAS2/CAS3/CAS3+ reading with VVDI prog? So we can make eeprom & flash backup without soldering. Yes. Xhorse is […]
Question: I need clone Audi bcm2 locked. I read eepprom and flash by vvdi prog with bcm2 adapter. old data to new data, I try to read write […]
Xhorse VVDI Prog programmer released new software V5.0.9 upgrade on Dec, 1st, 2021. VVDIPROG v5.0.9 (2021-12-01) * This version DON’t need update firmware * Modify […]
Question: Can Xhorse VVDI BIMTool Pro Read /write BMW FRM (Footwell module) EEPROM and repair flash? Answer: No. VVDI BIM Tool won’t repair […]
How do I change the mileage on this Cas3 0L15Y using Xhorse Vvdi Prog? Solution: The mileage is in the 2 first line. Vvdi prog is […]
This is going to use Xhorse VVDI PROG + PCF79XX Adapter to renew a Chinese F series HUF5767 FEM key. It’s succeeded to manage in […]
As titled, possible to add key to an Audi Q5 2015 BCM2 encrypted using Xhorse VVDI2? Yes, both add key and all keys lost. […]
Xhorse VVDI Prog programmer software was released to V5.0.8 on Oct. 27th, 2021. VVDIProg v5.0.8 (2021-10-27) * This version DON’t need update firmware * […]
As titled, here vvdishop.com introduces 2 methods to read and write Audi BCM2 D70F3634 mcu with xhorse vvdi prog programmer. Method 1: Soldering method. […]
Xhorse VVDI Prog software released to V5.0.7 on Sep. 24th, 2021. v5.0.7 (2021-09-24) * This version DON’t need update firmware + Modify LOCK_BCM2-1(ADAPTER), LOCK_BCM2-1(WELD), […]
Copyright © 2025 | WordPress Theme by MH Themes