Problem: The Xhorse Dolphin XP005 machine was working fine for a few weeks after placing mother board, but today it stopped working. Any solution? Solution: Y-axis and Z-axis are connected reversely. Reconnect Y and Z […]
Problem: I got the Xhorse dolphin xp005 but shows the database in Chinese. All versions are up to date. Try to change language to French, […]
Problem: I got the error 86 on my xhorse dolphin xp005 key cutter last month. I have it checked with my dealer and got the […]
Problem: The Xhorse Dolphin XP005 Key Cutting Machine can’t work normally, it gave a clamp calibration “Error: 35” message. “Error: The end tip of […]
I’m going to show how to use Xhorse Dolphin XP005L + Key Reader to cut a new Audi A6 HU66 key. Firstly you should have […]
Xhorse Dolphin XP005 and XP005L released new database version V127 on Oct. 18th. 2023. There is an update for that blade fixed. This version fixed […]
Some users reported that Xhorse Dolphin XP005/XP005L had bugs when cutting VA2/VA6 key blanks in the last update. The problem was solved by the last […]
Problem: One of our customers reported that his xhorse dolphin xp005 key cutting machine cannot charge the battery. VVDISHOP.COM Solution: Charge the battery for at […]
Problem: I got the xhorse dolphin xp005 mainboard replaced, then tried to restart the machine, it refused to start and there was a fault code […]
Problem: How to charge the battery of the xhorse dolphin xp005, I just bought it and it came without a charge and the connector light […]
Problem: I installed the Xhorse dolphin xp005 latest version 1.7.2 and after a day it got error 80. and after that it didn’t boot. Dolphin xp005 no longer finds me when I connect it to USB. nor does the BIOS appear on the display when I connect it to USB. i managed to install again i booted. but I can’t make keys with it because Error 80 appears. Any solution? Solution: Reinstall Dolphin driver Update firmware via Upgrade kit. Try several times. If […]
Problem: My xhorse dolphin xp005 stopped working and gave error code 86 on the little screen. The firmware has been updated several times. Any idea? […]
How to progress keys using the Xhorse Dolphin XP005 cut by single-bitting function? Here’s going to use Nissan lock as an example. I’ve got 8 […]
Here we’ll show how to decode and cut VW MQB HU162T-9 door lock by Xhorse VVDI Key Tool Plus Pad + Dolphin XP005 key cutting machine. Since […]
Here comes a similar problem: I have an issue with my Xhorse dolphin XP005 that message comes up when I try to cut regular edge […]
Copyright © 2026 | WordPress Theme by MH Themes