Problem:
I have Key decode error with xhorse m4 jaw.
The Xhorse application doesn’t let me calibrate the m4.
My work around has been to pause the machine mid decoding and then lower the probe with a allen wrench.
Suggestion:
You can go under universal duplication.
Sc1 doesn’t have a key profile on xhorse app.
Select M4 clamp.
If you can put something under to lift it up a bit it should work.
Xhorse Dolphin XP005 Sc1 key traced on the Dolphin and cut on the dolphin key machine with 2.5 cutter and the m4 jaw.
