Tips to Clear Tesla Airbag 1512876-00-E Crash with Xhorse Multi Prog

Xhorse Multi Prog will also read and write Tesla encrypted airbag 1512876-00-E with a Renesas R7F701330A processor.

 

Important Notice:
Note 1: Please read these notices and operating steps carefully before proceeding, otherwise the airbag may be damaged!!!

Note 2: This Tesla SRS airbag cannot undergo “Full Erase Unlock” and cannot have DFLASH2 erased/written, otherwise the airbag will not work!

Note 3: “Set IDCODE” has a certain probability of triggering serial port programming. If this occurs, please follow the prompts and continue the process!

Note 4: This menu only provides read, write, and erase functions; please modify the data yourself before writing!

 

Multi prog cannot repair data automatically. Read the data file in Jtag mode, send data to 3rd party to modify data.

Then write the modified data back to airbag module.

 

Operating Steps (Divided into the following two scenarios):
If you only need to erase DFLASH1, please follow these steps:

Read and back up the data of each partition.

Execute the “Erase DF1 Block” button to erase the block you selected. The erase length is 0x40 (i.e., 4 rows).

If you need to erase and write data, please follow these steps:

Read and back up the data of each partition.

Execute the “Set IDCODE” button (only needs to be executed once).

Once set successfully, you can directly read, write, and erase the chip.

 

Multi Prog Tesla Airbag R7F701330A Pinout

Requires MQB RH850 cable.

xhorse multi prog tesla airbag 1512876 00 E pinout 1

xhorse multi prog tesla airbag 1512876 00 E pinout 2

xhorse multi prog tesla airbag 1512876 00 E pinout 3