I’m gonna attempt to cut a 2022 Ford Maverick HU198T key with Xhorse Condor XC-Mini Plus II key cutting machine. I’ll decode it first then cut it.
Unfortunately, I can’t find the HU198T option under Maverick, so I’m going to try with Escape HU198T that may work.
Fix on a working key on M5 clamp.
Automotive >> Brand/ model >> Ford >> Escape >> HU198T >> Decode
Key learning success.
It’s 4534343122.
Install a new key blank on M5 clamp.
Starting cutting >> Cut
Side one is done, it looks all right.
We’re gonna see what we end up with one thing: the 20+ Bronco, 20+ Escape and 20+ Maverick. You may have to cut the mill, the tip of this key down if you notice. The 101 is angled over a little bit but let’s try cutting it anyway. And see what happens.
Let’s continue to cut the other side.
Flip over the key blank:
Starting cutting >> Cut
Xhorse Condor 2 is a new machine for me, but it does work in ease.
The new key can open the door & switch ignition on well.
Perfect work!
