Xhorse VVDI Prog MQB Adapter Read ok, Write Error 00?

Problem:

Tried to read VAG MQB D70F3532 cluster with xhorse vvdi prog and MQB solder free adapter, read works, write does not. Software says write error (00). Any solution?

Xhorse Vvdi Prog Mqb Write Error 00 1

Xhorse Vvdi Prog Mqb Write Error 00 2

Xhorse Vvdi Prog Mqb Write Error 00 3

Solution:

1.Make sure your vvdi prog software is up-to-date.

2. If reads ok, write does not, use a hot gun to heat the chip with a temperature 200 degreesĀ (Do not exceed 350 degrees).

3. If still fails, then use cut pin method to read/write this cluster.

 

 

 

Related reading:

Xhorse MQB Solder Free Adapters Chip Crack Failed Solution

Xhorse MQB Solder Free Adapters Try Frequency Failed Solution