Here are Xhorse Multi-Prog Programmer new tested review for Mercedes-Benz, Peugeot and VW ECU.
VVDI MultiProg reads Benz A-Class BOSCH MED17.7.2 ECU on bench successfully.
It can support to read INT EEPROM & INT FLASH.
Xhorse MultiProg clone Benz C-Class Continental SIM271DE ECU on bench successfully.
It can support to read INT EEPROM, INT FLASH, MAPS & EXT EEPROM.
Multi-Prog Programmer reads Peugeot MEV17.4.2 ECU boot mode successfully.
It can support to read INT EEPROM & INT FLASH.
Xhorse MultiProg reads VW BCM2 without soldering successfully.
BCM2 Solder Free Adapter & VVDI2 are required in the process.
Connect Solder Free Adapter to BCM2 module &Multi-Prog.
Connect VVDI2 to PC.
Open Multi-Prog software.
Read & save DATA1.
Run VVDI2 software.
Key learn >> Fifth Immobilizer System – Locked BCM2 Version >>
Step1. Identify BCM2 >> Load DATA1 File >> Confirm Vehicle Info
Back to Multi-Prog software.
Read & save DATA2.
Return to VVDI2 software.
Step2. Acquire BCM2 IMMO Data >> Yes >> Load DATA2 File
After server calculating successfully, click “Confirm” to save BCM2 IMMO data file.
It can be used for dealer key and key learn.
Note: Write service data back to BCM2 before BCM2 works!
Go back to Multi-Prog software.
Service – DATA/FILE >> Load service data >> Write
After successfully writing, install BCM2 module back to vehicle.
