Today I’m gonna show how to decode a HU162T 9-cuts key with Xhorse Dolphin II machine. The process may be the same with the Dolphin I XP005, you just use a phone instead of tablet screen.
Procedure
Cut by bitting >> Search HU162T >> HU162T-9
Dolphin XP005L tells to use M5 clamp side B, tip align 3rd align.
One thing to notice on the screen: there’s a little notch on one side.
If you hold the key up to the screen, we got the notch on top and we’re going to rotate it. This is how it needs to go in the M5 clamp. If you do it the other way, the machine will give an error. It’s not going to work.
Install the key blank onto M5 clamp B side.
Press “Decode key”.
Dolphin II machine will go through the process of decoding the key.
Just wait for it…
Decode key complete.
As we can see, the A axis have been calculated: 342455321
Let’s see B axis, it’s already filled in 324, which is correct.
Then if we hit C axis, it’s already filled in 231.
So you don’t have to decode all 3 sides, you just got to do the side with notch facing the correct direction. Xhorse Dolphin will decode the entire key bitting codes.
