Manual cutting is a special function of Xhorse Condor XC-Mini Plus II, which enable users to modify & shape key blanks. Does this ever happen to you? You need to duplicate a key, but all the key blanks at hand are too thick or too wide. At this time, you can use the xhorse Key Cutting Machine to cut key blank thin or narrow key blank.
How to Use Manual Cutting?
Condor Mini Plus path:
Manual cutting >> Normal modes/ Line mode
In normal mode, the cutter will start to work automatically if you press “Start spindle”. by pressing X/Y/X button, you can move the cutter to modify key blank. So you may need to mark the key blank as needed early.
On the left side of screen, you can adjust how fast the cutter moves and its single step distance.
- Line Mode
Line mode differs normal mode in points recording and automatic cutting. Based on the shape of the original key, you can mark the key blank first and record the points. Then Xhorse Condor II would cut the key automatically in accordance with the points recorded.
Under this mode, you can not only thin or narrow key blank, but also modify key blank into different shapes(mostly modify the key tip).
Refer to the post for detailed procedure:
Xhorse Condor XC-Mini Plus II Duplicate Honda Civic Pretty Thin Key