VVDI Prog Bosch ECU Adapter 40 Chip Enter Failed
Problem: I failed to read VAG EDC17CP44 with Xhorse vvdi prog and bosch ecu adapter. Software gave an error 40 chip enter failed. What’s the […]
Problem: I failed to read VAG EDC17CP44 with Xhorse vvdi prog and bosch ecu adapter. Software gave an error 40 chip enter failed. What’s the […]
BMW F32 2016 all keys lost is done by xhorse vvdi key tool plus. Put the wires directly to the ecu (EDC17C50) and you can read […]
Xhorse vvdi key tool plus release new license to read ISN from MSV80 MSV90 MSD80 MSD81 MSD85 MSD87 N20 N55 B38 ECUs/DMEs. What’s […]
Xhorse vvdi key tool plus released new BMW software update. The new upgrade allows to read BMW ISN from MSV80, MSV90, MSD80, MSD81, MSD85, MSD87, N20, N55, […]
Problem: I got a problem with the xhorse vvdi prog and the bosch ecu adapter. It read B48 ecu successfully but only gives VIN with […]
2017 BMW 330i B46 (MG1CS003) ISN failed to read with Yanhua ACDP, It is not G series, im508 reads it FEM system. Possible to read […]
Confirmed! BMW B48 B58 is working with the xhorse vvdi prog new Bosch ECU adapter upgrade. VVDI Prog B48 B58 wiring diagram VVDIProg read […]
Confirmed! Xhorse VVDI Prog reads PSA EDC17C60 ECU no issue. Way 1: Read it in boot pin. Way 2: Easier way. Read it with Bosch […]
How-to: Read ISN From ECU BMW N20/ N13 with Xhorse VVDI Prog and MOE Cable without soldering. The MOE BMW DME OBD ISN Cloning Cable comes […]
How-to: Read BMW EDC17C50 ECU ISN with Xhorse VVDI Prog and Bosch ECU adapter on bench. Read out BMW ISN code without opening ECU. ISN […]
Confirmed: newest VVDI Prog + Bosch ecu adapter can read PSA EDC17C60 successfully. Look at the following 3 images: Good luck! www.vvdishop.com
Xhorse VVDI prog latest software version v4.9.1 adds lots of ECUs (require Bosch ecu adapter). VVDI PROG V4.9.1 update v4.9.1 […]
Xhorse VVDI PROG programmer latest software version V4.9.0 update on Jan. 25th, 2020. VVDI Prog: ————————————- v4.9.0 (2020-01-15) * This version DON’t need update firmware + Add VVDI PROG USER MANUAL 4.9.0 version in Doc folder + Add R5F100_Data_8KB_Read_SECURED options in <2-MCU>-><RENESAS-RL78-G13> + Add R5F10C/D_Data_8KB_Read_SECURED options in <2-MCU>-><RENESAS-RL78-D1A> + Add R5F104_Data_8KB_Read_SECURED options in <2-MCU>-><RENESAS-RL78-G14> […]
Xhorse VVDI Prog programmer software released to V4.8.9. VVDIPROG V4.8.9 update ————————————- v4.8.9 (2019-12-21) * This version DON’t need update firmware + Add VVDI […]
Copyright © 2024 | WordPress Theme by MH Themes