Topic: Audi Q7 2007 all keys lost, key transponder 8E, ECU EDC16CP, which key programmer will help it to do key program?
- Use FVDI 2018 (svci 2018):
Done Audi A6 C6 last week, took out EZS – stering lock, read it ( use xprog or other programmer ) and xhorse VVDi2 from fvdi2018 made dealer key and added it to EZS dump. 2 h job. Q7 is the same story.
- VVDI2 using tips for Audi Q7 AKL
Read pin+cs from ecu, read with these data full e2 from ezs, prepare transponder, relearn key.
You need to do a force ignition so you can read ecu. Bridge 1 and 16 in obd2 port to force ignition/communication with some modules.
Question: If I go to eeprom from ECU with bdm and eeprom tool from vvdi, I will get the 7th bit of PIN.?
Answer: Yes if you use Dump tool, but You will get 6 bytes , on this car ECU has 6 bytes CS and EVL 12 bytes CS, Cars till 2009 can be done with 6 bytes and Pin OBD with VVDI2.
I read the EZS programmer vvdi prog and made a copy of the transponder, and the car started.
Credits to DK members.
To sum up:
FVDI 2018, vvdi prog and VVDI2 are confirmed to do learning key for Audi Q7 2007 all keys lost, key transponder 8E,ECU EDC16CP.
Maybe you also want to see: Program Audi Q7 2011 All Key Lost with VVDI2 and VVDI Prog