Xhorse ECU programmer

It is a Landrover Discovery 2013. Here we show how to read EDC17CP11 ECU and turn immo off with xhorse multi prog programmer.   With […]

Xhorse Multi Prog programmer read and write VAG EDC17C46 ECU successfully. Bench mode. Read INT eeprom ok, Read INT flash ok, Write INT eeprom ok, Write INT […]

Some users asked what the Xhorse Multi Prog OBD cable in the package is used for. The OBD cable connects multi-prog with vehicle via OBD […]

Problem: Xhorse Multi prog was not detected by the Windows 7 system. It says USB device is not recognized. Any solution? Solution: If it is […]

Xhorse Multi Prog programmer new user report: Porsche Boxster BCM programming is done. Replace a new BCM. BCM mark 1N35H Bench mode Read D-FLASH and P-flash […]

Problem: Tried to read VAG MQB RH850 RF7 cluster with xhorse multi prog. When i zoom in on the wiring diagram it becomes very blurred. Gets to 80% then hangs for 5 seconds then says retry. Any solution? VVDISHOP.COM Solution:   Press”Retry” in the […]

Xhorse Multi-Prog read and write Renesas V850 EPS (Electric Power Steering) module on a Land rover Range Rover Sport. Processor: Renesas D70F3485 Using wiring diagram pinout (Land rover Evoque/Benz […]

Xhorse Multi-Prog read BMW Continental MSD 80.2 DME on bench successfully.   Got a “faulty” ecu from BMW, MSD 80.2 and test it on bench with […]

We here just to inform you that Xhorse Multi Prog software V1.2.3.0 and firmware V1.2.7 fix the issue that the adapter for the CAS4 not […]