Xhorse Condor II Error Code 57 Solution
Problem Xhorse Condor II key cutting machine had error code 57. The probe is short-circuited. Solution Just as it indicated, the probe is short-circuited. Follow […]
Xhorse Key Cutting Machine
Xhorse Condor Mini Plus Black Screen Solution
Problem: I have a problem with the xhorse condor mini plus key cutting machine. After turning on machine and entering main interface, the screen turns […]
Solved: Xhorse Condor Mini Plus Failed to Connect Key Reader
Problem: I was going to use Xhorse VVDI Key Tool Max to control Condor XC-Mini Plus & Key Reader for a cutting. But it failed […]
How to Tighten Xhorse M3 Clamp for Condor/Dolphin?
A user reported that his Xhorse M3-A clamp is tightened well but M3-B is not. How to tighten both sides? Solution: Install screws before swapping clamps […]
Xhorse Dolphin XP005 Cut Can-Am Spyder ZD24R Key
Since I’ve used the ZD24R LISHI to pick and decode a Can-Am Spyder 3-wheel motocycle ignition, so next I’m going to cut the key with […]
Xhorse Condor Dolphin Fixed VA2EH2 Bug [November 2023]
Xhorse Condor Mini Plus/Condor II/Dolphin XP005/XP005L released a new database update on Nov. 7th, 2023. Serial number and firmware version: APP version: Android 4.1.5, iOS 4.1.5 […]
Xhorse Dolphin XP005 Not Working After Replacing Motherboard?
Problem: The Xhorse Dolphin XP005 machine was working fine for a few weeks after placing mother board, but today it stopped working. Any solution? Solution: Y-axis and Z-axis are connected reversely. Reconnect Y and Z […]
Xhorse Dolphin XP005L Language List
Does Xhorse Dolphin XP-005L support Spanish/Polish/Russian? This is a frequently asked question of dolphin ii key cutting machine. Database language is English ONLY. Device […]
Xhorse Dolphin “Current Device Does Not Support This Language”
Problem: I got the Xhorse dolphin xp005 but shows the database in Chinese. All versions are up to date. Try to change language to French, […]
Solved! Xhorse Dolphin 2 Unable to Remove M5 Clamp Issue
Problem: My Xhorse Dolphin 2 is unable to remove M5 Clamp even when twisting the right red button for many times. What’s wrong, any […]
Xhorse Dolphin XP005 Error 02233 Solution
Problem: I got the error 86 on my xhorse dolphin xp005 key cutter last month. I have it checked with my dealer and got the […]
Xhorse Dolphin XP005 Calibration Error 35 Solution
Problem: The Xhorse Dolphin XP005 Key Cutting Machine can’t work normally, it gave a clamp calibration “Error: 35” message. “Error: The end tip of […]
Xhorse Dolphin XP005L + Key Reader Cut Audi A6 HU66 Key
I’m going to show how to use Xhorse Dolphin XP005L + Key Reader to cut a new Audi A6 HU66 key. Firstly you should have […]
Xhorse Dolphin XP005 Database V127 Fixed VA2EH2 Cutting Issue
Xhorse Dolphin XP005 and XP005L released new database version V127 on Oct. 18th. 2023. There is an update for that blade fixed. This version fixed […]
Xhorse Dolphin FW 1.7.4 Fixed VA2 VA6 Cutting Bugs
Some users reported that Xhorse Dolphin XP005/XP005L had bugs when cutting VA2/VA6 key blanks in the last update. The problem was solved by the last […]