How to Change Xhorse Condor/Dolphin Ownership?
Question: I purchased a Xhorse Dolphin II key machine from a friend. I added the machine to my Xhorse app, but his email/info is still […]
Question: I purchased a Xhorse Dolphin II key machine from a friend. I added the machine to my Xhorse app, but his email/info is still […]
Xhorse Condor XC-Mini Plus II is able to cut 2020 Audi Q2 HU162T when all keys lost. Need only decode the shoulder front codes and sided […]
What’s the difference between 2023 new Xhorse dolphin xp005 (without battery version) and old Dolphin XP005 (with battery version)? New Dolphin XP005: 1. Without […]
Problem Xhorse Condor II key cutting machine had error code 57. The probe is short-circuited. Solution Just as it indicated, the probe is short-circuited. Follow […]
Problem: I have a problem with the xhorse condor mini plus key cutting machine. After turning on machine and entering main interface, the screen turns […]
Problem: I was going to use Xhorse VVDI Key Tool Max to control Condor XC-Mini Plus & Key Reader for a cutting. But it failed […]
A user reported that his Xhorse M3-A clamp is tightened well but M3-B is not. How to tighten both sides? Solution: Install screws before swapping clamps […]
Since I’ve used the ZD24R LISHI to pick and decode a Can-Am Spyder 3-wheel motocycle ignition, so next I’m going to cut the key with […]
Xhorse Condor Mini Plus/Condor II/Dolphin XP005/XP005L released a new database update on Nov. 7th, 2023. Serial number and firmware version: APP version: Android 4.1.5, iOS 4.1.5 […]
Problem: The Xhorse Dolphin XP005 machine was working fine for a few weeks after placing mother board, but today it stopped working. Any solution? Solution: Y-axis and Z-axis are connected reversely. Reconnect Y and Z […]
Does Xhorse Dolphin XP-005L support Spanish/Polish/Russian? This is a frequently asked question of dolphin ii key cutting machine. Database language is English ONLY. Device […]
Problem: I got the Xhorse dolphin xp005 but shows the database in Chinese. All versions are up to date. Try to change language to French, […]
Problem: My Xhorse Dolphin 2 is unable to remove M5 Clamp even when twisting the right red button for many times. What’s wrong, any […]
Problem: I got the error 86 on my xhorse dolphin xp005 key cutter last month. I have it checked with my dealer and got the […]
Problem: The Xhorse Dolphin XP005 Key Cutting Machine can’t work normally, it gave a clamp calibration “Error: 35” message. “Error: The end tip of […]
Copyright © 2026 | WordPress Theme by MH Themes